imageBuilding Products

All Building products All Roofing products All Flooring products All Passive fire protection products All Radon & gas protection products
Composite Decking Boards  +
Tile Adhesives & Grouts  +
Drainage Channels  +
Personal Protective Equipment  +
Meter Boxes  +
Shelving  +
Corriboard Protection Boards  +
Membrane Tapes  +
Tube & Fittings  +
DPC & DPM  +
Permeable Roof Underlayment  +
Handrail  +
Breather Membranes  +
Basta Door Handles & Accessories  +
Floor Levelling Compounds  +
Complete Loft Ladder  +
Impact Sound Insulation  +
Oxide Paint  +
Floor Protection  +
Artificial Grass  +
Tile Trims & Tools  +
Drives & Pathways Solutions  +
Syn-oxide Lead Free Oxide Paint  +
Underslating  +
Bituminous Roofing Felts  +
Roof Slates  +
Liquid Waterproofing  +
PVC Membranes  +
Roof Coatings  +
Hybrid Liquid Waterproofing Membranes  +
Insulation Panels  +
Hot Melt  +
EPDM Membranes  +
MPM Liquid Waterproofing  +
Synthetic Slates  +
Knauf Fall Arrest Sytems  +
Single Ply RESITRIX Hybrid Membranes  +
Artificial Grass  +
Safety Floors  +
Impact Sound & Vibration Insulation  +
Floor Repairs  +
Floor Coating Products  +
Sports Flooring - Indoor  +
Wetroom Solutions  +
Vinyl Wall Coverings & Protection  +
Impact Sound & Acoustic Insulation  +
Flooring Tools & Accessories  +
Commercial Carpet  +
Underlay & Accessories  +
Linear Joint Seals  +
Load Bearing Seals  +
Non-Load Bearing Seals  +
Pipe & Penetration Closers  +
Sealants & Coatings  +
Radon Barrier Membranes  +
Radon Sumps  +
Radon Tapes  +
Radon Top Hats  +
Radon Pre-formed Corners  +
All Products
All Building Products
All Roofing Products
All Flooring Products
All Radon & Gas Protection Products
Technical Resources
Contact Us Log In
Tremco SX070 Feather Finish Compound

Flooring / Adhesives, Screeds & DPMs / Screeds & Levelling Compounds / Tremco SX070 Feather Finish Compound

Tremco SX070 Feather Finish Compound

SX070 is a rapid drying feather finish compound for interior applications. Ideal for smoothing and repairing the subfloors prior to the installation of a floor covering.

KNOW MORE

Everything You Need to Know

1. Short setting and cure time, facilitating a fast track program and minimising disruption
2. Can be applied over well bonded thin film adhesive residues
3. Does not require a primer prior to application
4. Can be used to repair ridges and depressions up to 12 mm, or to achieve a true feather edge
5. Excellent adhesion to a wide range of common flooring substrates, including: concrete, sand/cement screeds, plywood, glazed and unglazed floor tiles, etc.
Composition

A blend of special cements, graded fillers and modified polymers

Open Time/Workability (at +20°C)

15 minutes

Pot Life (at 20°C)

20 minutes

Coverage

An average thickness of 1 mm will give a coverage rate of 14 m² per mix. Up to 50 m² coverage may be achieved when used as a true feather edge.

Cure Time (at 20°C)

Floor Covering: After 1 hour, Full Traffic: After 24 hours

Storage

Store in dry shaded conditions between +5°C and +25°C

Shelf Life

6 months when stored as recommended in original unopened packaging