imageBuilding Products

All Building products All Roofing products All Flooring products All Passive fire protection products All Radon & gas protection products
Composite Decking Boards  +
Tile Adhesives & Grouts  +
Drainage Channels  +
Personal Protective Equipment  +
Meter Boxes  +
Shelving  +
Corriboard Protection Boards  +
Membrane Tapes  +
Tube & Fittings  +
DPC & DPM  +
Permeable Roof Underlayment  +
Handrail  +
Breather Membranes  +
Basta Door Handles & Accessories  +
Floor Levelling Compounds  +
Complete Loft Ladder  +
Impact Sound Insulation  +
Oxide Paint  +
Floor Protection  +
Artificial Grass  +
Tile Trims & Tools  +
Drives & Pathways Solutions  +
Syn-oxide Lead Free Oxide Paint  +
Underslating  +
Bituminous Roofing Felts  +
Roof Slates  +
Liquid Waterproofing  +
PVC Membranes  +
Roof Coatings  +
Hybrid Liquid Waterproofing Membranes  +
Insulation Panels  +
Hot Melt  +
EPDM Membranes  +
MPM Liquid Waterproofing  +
Synthetic Slates  +
Knauf Fall Arrest Sytems  +
Single Ply RESITRIX Hybrid Membranes  +
Artificial Grass  +
Safety Floors  +
Impact Sound & Vibration Insulation  +
Floor Repairs  +
Floor Coating Products  +
Sports Flooring - Indoor  +
Wetroom Solutions  +
Vinyl Wall Coverings & Protection  +
Impact Sound & Acoustic Insulation  +
Flooring Tools & Accessories  +
Commercial Carpet  +
Underlay & Accessories  +
Linear Joint Seals  +
Load Bearing Seals  +
Non-Load Bearing Seals  +
Pipe & Penetration Closers  +
Sealants & Coatings  +
Radon Barrier Membranes  +
Radon Sumps  +
Radon Tapes  +
Radon Top Hats  +
Radon Pre-formed Corners  +
All Products
All Building Products
All Roofing Products
All Flooring Products
All Radon & Gas Protection Products
Technical Resources
Contact Us Log In
Unilin Insulation FR/MG

Roofing / Insulation / Tissue Faced / Unilin Insulation FR/MG

Unilin Insulation FR/MG

Single Ply Fully Adhered Partially Bonded Built-Up Felt Systems
Flat Roof MG is a high performance
Polyisocyanurate with mineral coated glass facers suitable for use below single ply fully adhered or partially bonded built up felt systems.
image

Unilin Insulation FR/MG is suitable for use with most fully adhered single–ply waterproofing membranes. Board joints and abutments should be taped subject to the approved adhesive system being used. A fleeced backed membrane might be required with the system being used, check with the system manufacturer.

KNOW MORE

Everything You Need to Know

1. Compatible with adhesively bonded single ply roofing membranes laid on mechanically fixed boards
2. Compatible with most green roof systems
3. Closed cell structure – moisture resistant
4. FM Approval
5. Easy to Install
6. High Thermal Performance Rigid Insulation
7. Suitable for new build and refurbishment
8. Non-deleterious material
9. High Compressive Strength
Density (Foam Core)

32kg/m3

Compressive Strength

>150kPa@10% Compression

Water Vapour Resistivity

>100MNs/gm

BBA Certified Thermal conductivity range

0.024 – 0.026 W/mK

Facings

Mineral Glass Coated Facings

Core

Rigid PIR Foam

Board size

1200mm x 600mm 1200mm x 1200mm

Board Profile

Square Edge