Building
Products
Building Products / Building Products / Concrete / Block Paving / Tarmac / Drives & Pathways Solutions / Bond It Tarmac Restorer
A ready-to-use, black, water-based coating for tarmac drives and pathways, designed to restore colour, reduce water penetration, and protect from dirt/grime build-up.
Uses
Designed to restore colour, reduce water penetration, and protect from dirt/grime build-up.
Application
DRIVE ALIVE TARMAC RESTORER is ready to use, and does not require diluting. Stir thoroughly before using and ensure the surface is completely dry prior to application. Apply using a brush, roller or squeegee, ensuring that no pooling or ponding occurs. Two coats are recommended, allow a minimum of 4 hours between coats. Cold or humid conditions will slow drying times.
KNOW MORE
Blue/black liquid - dries black, non-flammable, water miscible
Do not apply to wet surfaces, in high humidity or when rain is expected
5℃ to 30℃
4 hours in warm, sunny conditions
16- 24 m2 per 4 litre container
Rinse then wash brushes and rollers in warm, soapy water
2 years
4 L
PRODUCTS
