Building
Products
Building Products / Building Products / Surface Treatments / Bond It Dust Proofer & Hardener
A premium quality, chloride-free, low viscosity liquid that penetrates and chemically seals concrete. Produces a hard wearing, non-dusty surface. Suitable for use on garage, warehouse, factory or workshop floors.
Application
Gloves, boots and goggles should be worn at all times during application. Ensure all surfaces are clean, dry and free from oil, grease, paint or polish to maximise the effectiveness of this product. If in doubt use Bond It BRICK & PATIO CLEANER to remove any stubborn stains before washing down and applying Bond It DUSTPROOFER & HARDENER. Apply uniformly using a brush at the rate of 3-5m2 per litre ensuring puddling does not occur and using a firm action to work the product well into the floor. Allow the first coat to cure overnight before applying a second coat, which is normally sufficient for most floor types. Further coats can be applied, allowing the previous coat to cure before application, remembering to leave at least 24 hours before washing down.
KNOW MORE
Non Flammable
100℃
Soluble
Approximately 11-13
Colourless liquid
5L 25L 200L
PRODUCTS
