imageBuilding Products

All Building products All Roofing products All Flooring products All Passive fire protection products All Radon & gas protection products
Composite Decking Boards  +
Tile Adhesives & Grouts  +
Drainage Channels  +
Personal Protective Equipment  +
Meter Boxes  +
Shelving  +
Corriboard Protection Boards  +
Membrane Tapes  +
Tube & Fittings  +
DPC & DPM  +
Permeable Roof Underlayment  +
Handrail  +
Breather Membranes  +
Basta Door Handles & Accessories  +
Floor Levelling Compounds  +
Complete Loft Ladder  +
Impact Sound Insulation  +
Oxide Paint  +
Floor Protection  +
Artificial Grass  +
Tile Trims & Tools  +
Drives & Pathways Solutions  +
Syn-oxide Lead Free Oxide Paint  +
Underslating  +
Bituminous Roofing Felts  +
Roof Slates  +
Liquid Waterproofing  +
PVC Membranes  +
Roof Coatings  +
Hybrid Liquid Waterproofing Membranes  +
Insulation Panels  +
Hot Melt  +
EPDM Membranes  +
MPM Liquid Waterproofing  +
Synthetic Slates  +
Knauf Fall Arrest Sytems  +
Single Ply RESITRIX Hybrid Membranes  +
Artificial Grass  +
Safety Floors  +
Impact Sound & Vibration Insulation  +
Floor Repairs  +
Floor Coating Products  +
Sports Flooring - Indoor  +
Wetroom Solutions  +
Vinyl Wall Coverings & Protection  +
Impact Sound & Acoustic Insulation  +
Flooring Tools & Accessories  +
Commercial Carpet  +
Underlay & Accessories  +
Linear Joint Seals  +
Load Bearing Seals  +
Non-Load Bearing Seals  +
Pipe & Penetration Closers  +
Sealants & Coatings  +
Radon Barrier Membranes  +
Radon Sumps  +
Radon Tapes  +
Radon Top Hats  +
Radon Pre-formed Corners  +
All Products
All Building Products
All Roofing Products
All Flooring Products
All Radon & Gas Protection Products
Technical Resources
Contact Us Log In
Bond It Pro-Mate Glazing Silicone

Building Products / Building Products / Silicones & Sealants / DIY Sealants / Bond It Pro-Mate Glazing Silicone

Bond It Pro-Mate Glazing Silicone

An advanced, low modulus acetoxy (LMA) silicone sealant. Suitable for exterior and interior applications, where the joint movement does not exceed 20% and where the long term durability of silicone is required.

Conforms to EN15651-1,2; F EXT-INT, G 20LM.

KNOW MORE

Everything You Need to Know

Skinning Time

Less than 10 minutes

Full Cure

24-48 hours depending on conditions and bead depth

Extensibility

Up to 400% at breaking point

Application Temperature

+5 to + 30°C

Service Temperature

-40 to + 100°C

Adhesion

Good to glass, ceramics, and many plastics