imageBuilding Products

All Building products All Roofing products All Flooring products All Passive fire protection products All Radon & gas protection products
Composite Decking Boards  +
Tile Adhesives & Grouts  +
Drainage Channels  +
Personal Protective Equipment  +
Meter Boxes  +
Shelving  +
Corriboard Protection Boards  +
Membrane Tapes  +
Tube & Fittings  +
DPC & DPM  +
Permeable Roof Underlayment  +
Handrail  +
Breather Membranes  +
Basta Door Handles & Accessories  +
Floor Levelling Compounds  +
Complete Loft Ladder  +
Impact Sound Insulation  +
Oxide Paint  +
Floor Protection  +
Artificial Grass  +
Tile Trims & Tools  +
Drives & Pathways Solutions  +
Syn-oxide Lead Free Oxide Paint  +
Underslating  +
Bituminous Roofing Felts  +
Roof Slates  +
Liquid Waterproofing  +
PVC Membranes  +
Roof Coatings  +
Hybrid Liquid Waterproofing Membranes  +
Insulation Panels  +
Hot Melt  +
EPDM Membranes  +
MPM Liquid Waterproofing  +
Synthetic Slates  +
Knauf Fall Arrest Sytems  +
Single Ply RESITRIX Hybrid Membranes  +
Artificial Grass  +
Safety Floors  +
Impact Sound & Vibration Insulation  +
Floor Repairs  +
Floor Coating Products  +
Sports Flooring - Indoor  +
Wetroom Solutions  +
Vinyl Wall Coverings & Protection  +
Impact Sound & Acoustic Insulation  +
Flooring Tools & Accessories  +
Commercial Carpet  +
Underlay & Accessories  +
Linear Joint Seals  +
Load Bearing Seals  +
Non-Load Bearing Seals  +
Pipe & Penetration Closers  +
Sealants & Coatings  +
Radon Barrier Membranes  +
Radon Sumps  +
Radon Tapes  +
Radon Top Hats  +
Radon Pre-formed Corners  +
All Products
All Building Products
All Roofing Products
All Flooring Products
All Radon & Gas Protection Products
Technical Resources
Contact Us Log In
Tremco SX200 Self Levelling Compound

Flooring / Adhesives, Screeds & DPMs / Screeds & Levelling Compounds / Tremco SX200 Self Levelling Compound

Tremco SX200 Self Levelling Compound

SX200 is a fast drying, self levelling, and pump applied underlayment, for levelling of concrete floors before the installation of floor coverings. Provides good resistance to impact, point loading and abrasion. Ideally suited to floors in office buildings, shops, public buildings, schools, hospitals, airports and prisons.

KNOW MORE

Everything You Need to Know

1. Environmentally friendly product: OPC free and 38% recycled content
2. Protein free - will not harbor bacteria
3. Fast setting - walk on after 2 - 4 hours under suitable conditions
4. Up to 30% reduction in environmental impact and global warming potential compared to traditional cementitious screeds
5. Rapid installation – 2000 m² per day for 7 mm thickness, under suitable conditions
Temperature Resistance

+50°C max

Abrasion Resistance

(Taber H22 Wheel/1 kg) 1.7g loss/1000 cycles

Ultimate Compressive Strength

BS EN 196: 35 N/mm²

Shrinkage

< 0.06%

Thickness

3 – 30 mm

Mix Ratio per 25 kg

4.5 – 5 litres water

Coverage

An average thickness of 3 mm will provide a typical coverage rate of 5 m² per mix

Cure Time (at 20°C) 10 mm thickness

at 10°C: Walk On 4 - 8 hours, Full traffic 2 days