Building
Products
Building Products / Building Products / Concrete / Block Paving / Tarmac / Drives & Pathways Solutions / Bond It Clear Coat Block Sealer
A ready to use, clear sealant for block paving, paths and drive ways. Protects from water penetration, staining and dirt/grime build-up.
Preparation
Remove any moss or lichen that may be present. For best results use DRIVE ALIVE ORGANIC CLEANER prior to application (ensure the residue is thoroughly washed off and left to dry for 48 hours prior to application.) Ensure the surface to be treated is free from oil, grease, dust and any other loose material that may hinder adhesion. It is recommended that a test be carried out on a small inconspicuous area to ensure the required effect is achieved.
KNOW MORE
Milky white liquid, non-flammable, zero VOC, water miscible
STIR WELL BEFORE USE. Do not apply to wet surfaces, in high humidity or when rain is expected
5℃ to 30℃
1-2 hours in warm, sunny conditions
40 - 60m2 per 4 litre container
Rinse then wash brushes and rollers in warm, soapy water
2 years
4L
PRODUCTS
