Building
Products
Building Products / Building Products / Concrete / Block Paving / Tarmac / Drives & Pathways Solutions / Bond It Colour Enhancer
Designed to enhance coloured concrete and block paving as well as protect from water penetration, oil or grease spillages and dirt/grime build-up. Will enhance present colour and extend the lifespan of the treated surface. A ready-to-use, coloured solution for use on concrete, block paving, paving slabs, walling and roof tiles.
Preparation
Remove any moss or lichen that may be present. For best results use DRIVE ALIVE ORGANIC CLEANER prior to application (ensure the residue is thoroughly washed off and left to dry for 48 hours prior to application.) Ensure the surface to be treated is free from oil (DRIVE ALIVE OIL STAIN REMOVER should be used to remove any oil stains), grease, dust and any other loose material that may hinder adhesion. It is recommended that a test be carried out on a small inconspicuous area to ensure the required effect is achieved. Mask off all areas not to be coloured as product cannot be removed once applied. Wear gloves and overalls to protect clothes and skin from splashes. Place the container on polythene or cardboard prior to opening to contain any drips.
KNOW MORE
Coloured liquid, non-flammable, zero VOC, water miscible
STIR WELL BEFORE USE AND PERIODICALLY DURING USE. Do not apply to wet surfaces, in high humidity or when rain is expected
5℃ to 30℃
1-2 hours in warm, sunny conditions
40 - 60m2 per 4 litre container
Rinse then wash brushes and rollers in warm, soapy water
2 years
Red, Brindle, Buff, Charcoal
PRODUCTS
